forums
new posts
donate
UER Store
events
location db
db map
search
members
faq
terms of service
privacy policy
register
login




 1 2 
UER Forum > Private Boards Index > A/V Club > Lights! (Viewed 8299 times)
rostit 


Location: South Eastern PA
Gender: Male
Total Likes: 2 likes


Imma herpin ma derp like YEAHH!!

 |  | 
Re: Lights!
< Reply # 20 on 4/9/2006 9:34 PM >
Reply with Quote
Posted on Forum: UER Forum
Doing it with a digital video camera would probably require poking around its guts with an o-scope to find a clock signal. Then a little amp to trigger the strobe, etc.


Except for the fact that there isnt any "shutter" in a digital video cam. You would end up with odd lighting on the tape since the type of compression that DV uses would end up having some pixels lit up properly and others way off. The only time the pixel is updated is when the light info for that pixel actually changes. You couldnt really sync a strobe up with that. Plus there isnt just one particular "clock" signal to catch. The only way to really do it with a digital cam would be to add a "shutter effect" and use the time-code(if its a time code cam) to sync the strobe up, but that would still require a special custom made device that would have software that could read timecode and sync the light.

I really wouldnt reccomend telling anyone to play with strobes. Especially whilke UE'ing. I can only imagine the type of dangerous things that could happen with a fully charged Strobe pack and an accidental dip into the water of a drain. The current out of one of them is not to be messed with.

The best solution for lighting hasnt even been suggested yet.

LED's Hi Intensity. I actually built an exact replacement bulb for my VideoProjector(Infocus LP-350). It had an HID bulb running at around 400v at 2k(i think). Now it runs on 24vdc and about 2amps. The lumen output is better than the original 1100ansi lumens the original light source had.

Experiment with using red,green, and blue LED's(use hi output) and you can create any color of light that you need by varying the level of each color array. I used 120LED, or 40 per color for my bulb. You could probably get away with 90 or maybe even less. I suggest experimenting with them. The life of the bulbs are almost for ever, and the current draw is extrememly light on the power source.

Interesting thread I must say.




Ben 

Noble Donor


Location: Mojave Desert
Gender: Male
Total Likes: 0 likes




 |  |  | AIM Message
Re: Lights!
< Reply # 21 on 4/11/2006 6:53 PM >
Reply with Quote
Posted on Forum: UER Forum
Ah. I didn't know that digital video cameras were that different from analog ones, though I should have expected.

The spectrum out of an LED array would be a bit ugly, but should be sufficient for most purposes. Not for the math or soldering impaired.




Kay O. Sweaver 


Location: Montreal, Quebec
Gender: Male
Total Likes: 1 like


Happiness is saying yes more often than no.

 |  | 
Re: Lights!
< Reply # 22 on 4/27/2006 6:23 PM >
Reply with Quote
Posted on Forum: UER Forum
A good video camera could be synched to the strobe, just like they can be synched to a monitor or flourescent light. Sounds like a lot of complicated work though.

The LEDs sound good, but I'm skeptical. I've never seen an LED produce good throw beyond a few feet and from what I understand even bright white LEDs aren't full spectrum.

My friend just got a 12V 75W camera mounted light using MR16 bulbs. Puts out really nice light. I think he paid too much for it, I could build one for a fraction of the cost, but then mine wouldn't have all the bells & whistles his has...




==========================
Amy Smith is an infected slut
UER Forum > Private Boards Index > A/V Club > Lights! (Viewed 8299 times)
 1 2 


Add a poll to this thread



This thread is in a public category, and can't be made private.



All content and images copyright © 2002-2024 UER.CA and respective creators. Graphical Design by Crossfire.
To contact webmaster, or click to email with problems or other questions about this site: UER CONTACT
View Terms of Service | View Privacy Policy | Server colocation provided by Beanfield
This page was generated for you in 62 milliseconds. Since June 23, 2002, a total of 737040152 pages have been generated.