Below is the reply from my tech...
A RAT tone is a button you push on the side of the radio which sends either a SingleTone or a series of DTMF tones which will open up the channel. The MDC is a form of ANI which could be set wrong (check the MDC Pre-Time, and make sure it's set to something small like 50msec or some such)..
If you want... e-mail me a copy of the codeplug from the radio and I'll take a look at it.. (
[email protected])
Thanks!
-Mike
-----------
From: r0f
To: ExKa|iBuR
Posted: Fri Jan 16, 2004 5:39 am
Subject: Re: saber problem...
Sorry, am not familiar with that problem.
Try checking for RAT (Repeater Access Tones) or MDC signalling which may be programmed incorrectly. A tone to me, could mean something very different to someone else who has no clue.
S