Thought you guys might be interested....
AST 4200 coil-overs: 12 adj rebound, 12 adj compression
AST rear shock mounts
AST rear ride height adjusters
Hyperco 60mm x 6" x 600 lb/in front springs
Hyperco 60mm x 5.5" x 650 lb/in rear springs
Vorshlag Camber Plates
http://www.vorshla...52&products_id=223 UUC System U exhaust:
UUC Stage II LTW Flywheel (8.5#) and M5 clutch
And minor things (Bushings, Ball Joints, Etc):
Not pictured:
VAC oil pan baffle
SS brake lines
Vorshlag Motor Mounts
UUC trans mounts
Subframe reinforcements
Z3 steering rack
new front control arms
SPC adjustable rear control arms
UUC front control arm bushings
New tie rod assemblies
And a bunch of other maintenance (hoses, bushings, reservoirs, u-joints, and fluids).
I don't get a lot of time to work on it, but I think I'll have the car back together by mid February which will be in time to start in the spring autox series.