Posted by Jesus Jones Washu, I have a question. Would I see a great deal of better performance if I switched from a 735mHz to a 933mHz? Crayon, the second PCI card, it has a VGA port. Is it a 8mb or higher graphics card? Im interested

I wouldn't say the increase would be great, but it would probably be noticable on some tasks. If you have a 735 (733) then you already have a 133 bus MB.

I have some PCI video cards myself, I think a couple with 16 MB (not at home, need to check). However, if you are not intending to run 3D then you only need enough video RAM to hold the framebuffer and 4 MB is enough for 1280x1024 or lower.

Posted by Jesus Jones Crayon, the second PCI card, it has a VGA port. Is it a 8mb or higher graphics card? Im interested

I honestly can't seem to find out. All I know is the make/model - Matrox MGA-MYST/4NR. The video bios doesn't tell me anything either. Washu said he had a bunch of old video cards though, might want to see what he's got.

Posted by Washu I wouldn't say the increase would be great, but it would probably be noticable on some tasks. If you have a 735 (733) then you already have a 133 bus MB. I have some PCI video cards myself, I think a couple with 16 MB (not at home, need to check). However, if you are not intending to run 3D then you only need enough video RAM to hold the framebuffer and 4 MB is enough for 1280x1024 or lower.

Now that I *do look harder* Id does support the 133 FSB as you said, if the performance isnt going to be largely noticeable then I guess I wont switch.

Alright. Here are the remaining parts I plan on "somehow obtaining" to put in my PIII. If anyone has anything close to what I have there, please let me know. I might be buying a PSU off Kbasa to replace the one in the case I am getting for this sucker. If anyone has any parts that follow the specs I have in the wish list that they would sell to me for cheaper, let me know. (all RAM must be PC 133 and 512MB. Motherboard must be able to support 1.5 GB of RAM and bus speed of 133 MHz)

Anyone want a copy of Battlefield 1942: Secret Weapons of WWII [expansion pack]?
It looks like they're selling for $18.43, so I'd sell it at $17. Note that this is still in original box, with manuals and everything. The only thing "wrong" with this set is that you need the original BF1942 installed.
----------
I also have a 3disc set entitled "Live distro bonanza". This set includes:
- Gnome 2.6
- Slax (Slackware livecd)
- RPM linux
- GIMP 2.0
- Damn Small Linux
- Knoppix v3.3
Make me decent offer for these CDs ;).
-----------
I also have about 100 different National Geographic mags, some of which dating back to 1926. More information on request.
-----------
...As well as 34 CD-ROM drives (about 29 of them are from an old CD server I got from the dump).
-----------
I also have a few computer cases, that are in excellent shape.
-----------
And finally; I have a crapload of assorted PCI cards (both new and old). If interested give me a ring ;).


If you want pictures of any of these items, give me a ring and I'll post `em.
Shipping costs are negotiable; depending on the item I might be able to pay.

I'll be willing to trade items of near equal value for either a switch and/or a crossover cable.

- stealthy

I'm poor.

I'm also absolutely desperate for an Intel Pentium 2/3 SE440BX-2 board (with cpu and ram would be nice) and they keep going by on Ebay for just a bit more than I can afford. Plus the shipping costs inside my country are crazy since DHL, the shipping company (Similar to UPS) bought the rights to ship all packets, so it's actually cheaper to ship form the US to here for most tihngs...

So if any of you fellow Trash Junkies have one of them, and would consider parting with it for a small amount of money...

I was so hoping for this one
http://cgi.ebay.de...7047QQcmdZViewItem
but 25$US is a bit too steep when I still need parts for it to work it.

I need a 20-30 gb IDE laptop drive... new or well cared for. Make me an offer, i pay paypal.

I need a 7200RPM IDE HDD of 10 gigs or more...
And a socket 370 PIII board (133MHZ FSB.) with the capability to hold at least 1 GB of 168pin 133MHz SDRAM (here is one I have, and really want to have another like it...)

Looking for a complete PII 233 or more DESKTOP pc. Harddrive 4 gb or bigger. Ram: 64 or more.

I pay Paypal or Bidpay....

Thanks.

Cripes. Ive got one of each of the things y'all are askin for. But I cannot part with em, cause I need thme myself

The PII/PIII motherboard is running my box in my toilet room (Simple, on the shitter webbrowsing. (Thats Beryl and PC)

Ive got a 7200RPM 40gb laptop drive in a laptop that a roommate has and I have the P3 board in use in my main box, a 800mHz Coppermine

I have an ASUS P4 board with a 2.4g celeron that "died" but I cannot find anything wrong with it physically. If anyone wants it, just pay postage. The processor was good but is missing a pin.

Posted by Jesus Jones The PII/PIII motherboard is running my box in my toilet room (Simple, on the shitter webbrowsing. (Thats Beryl and PC)

I just use my laptop with WIFI for that...

Posted by Professor Chaos Looking for a complete PII 233 or more DESKTOP pc. Harddrive 4 gb or bigger. Ram: 64 or more. I pay Paypal or Bidpay.... Thanks.

Are you implying that it has to be a desktop case? I have a couple of K6/2 450s in mini towers I could part with. I do have a complete slimline desktop PC but it's only a P166 MMX.

Well my mighty list o' junk is nearly complete and almost ready to be posted. I'll be having a fire sale to get rid of ye olde pile o stuff - I may not have a P2 200 but I've got 3 p1 100's! Anyway, it looks like I'll have a number of boxes that will make nice little linux routers and the like. I'll get it posted soon.

Posted by Professor Chaos I just use my laptop with WIFI for that...

Well, anyone who owns a laptop here wont take it within 50ft of the crappers so... Im SOL for that. Just as well, I like my mobo-on shitter-wall look.

Posted by Jesus Jones Well, anyone who owns a laptop here wont take it within 50ft of the crappers so... Im SOL for that. Just as well, I like my mobo-on shitter-wall look.

I take mine with me to the shitter. Hell, it's too big to fall in. Damn if I don't get numb legs after an hour or so. =)

Well, everyone in my place pissed away 2 or 3 grand on some overpriced x86 laptop or a Powerbook

Posted by I Bificus I take mine with me to the shitter. Hell, it's too big to fall in. Damn if I don't get numb legs after an hour or so. =)

I just shit quickly so I can get back to my desktop

I have a lot of extra computer parts lying around. I'll post them on here after I test them out.

Posted by Washu Are you implying that it has to be a desktop case? I have a couple of K6/2 450s in mini towers I could part with. I do have a complete slimline desktop PC but it's only a P166 MMX.

No it does not have to be standard ATX. PM me about the K6/2s!

128MB DDR PC2100 Laptop RAM is up for sale...

For people in the Denver metro area, I need a ATX case or a Micro ATX case, or Both. Also looking for 20 pin power supplies.