|
|
|
UER Store
|
|
sweet UER decals:
|
|
|
|
Activity
|
|
730 online
Server Time:
2024-05-11 12:08:10
|
|
|
musket boy
Location: Maui Gender: Male
It smells like your grandpa and your feet stick to the floor
| | | | Re: a guide to basic rope work <Reply # 20 on 1/28/2010 5:07 AM >
| | | those things are really bad for your rope they twist it a shitload and wear out the sheath
uering |
|
\/adder
Location: DunkarooLand Gender: Male
I'm the worst of the best but I'm in this race.
| | | Re: a guide to basic rope work <Reply # 21 on 1/28/2010 5:54 AM >
| | | Posted by musket boy
those things are really bad for your rope they twist it a shitload and wear out the sheath
|
Do they? I haven't bought one yet, but noticed his device was similar. I have a Petzl Verso and Mammut Element 8; I'm saving up right now for an Ascending rig. I bought a Petzl Ascension but still need to buy a Croll, Quickfix, and Quickstep none of which EMS carries in store. Ascender+Verso originally $98.54 -15% student discount and -$25 off $75+ gearbucks card ... saved 40 bucks there.
"No risk, no reward, no fun." "Go all the way or walk away" escensi omnis... |
|
Therrin This member has been banned. See the banlist for more information.
Location: North of Chicago, IL Gender: Male
*Therrin puts on the penguin-suit
| | | Re: a guide to basic rope work <Reply # 22 on 1/28/2010 6:27 AM >
| | | Posted by RailGuy88
?? Not understanding your question.
|
Carabiners/mallions. What kind do you have to use? They decided for my industry (arborist) you're required to use at least double locking automatic 'biners. Because "people weren't screwing the screw-gates all the way shut and there were accidents". So instead of correcting the thinking/improving training, they think they'll fix it with a "fool-proof" solution. There's a few problems with auto's though: 1) People almost NEVER check to make sure they're closed properly. 2) If you get even a little bit of sap in the gate mechanism it can gum it up so it doesn't close and/or lock properly. 3) With most of the auto's, a simple sliding pressure against the gate (like sliding across a branch), or a downward diagonal motion will unlock double and triple locking biners. At least with a screw-gate it has to be repeated rolling action against the gate to get it to do the same thing, and that's something you can at least keep an eye on.
This is why I get pissed off at OSHA/ANSI for "making up shit that sounds good", but really has no bearing on fixing the problems inherent in the industry.
/RANT =P
Give a person a match and they'll be warm for a minute, but light them on fire and they'll be warm for the rest of their life. =) |
|
RailGuy88 This member has been banned. See the banlist for more information.
Location: Where you're not... Gender: Male
| | Re: a guide to basic rope work <Reply # 23 on 1/28/2010 6:31 AM >
| | | Oh, auto-close/auto-lock. I've never had any issues with them opening or causing issues. Also, no trees in towers the last I checked, so no sap to worry about. I've got full-body harness w/ seat, hoards of d-rings everywhere, gear bucket, lanyards (Y and adjustable), taglines, and cool tools that I bought to go with 'em all. DJ Craig will testify to my crap.
Going where others can't... |
|
Therrin This member has been banned. See the banlist for more information.
Location: North of Chicago, IL Gender: Male
*Therrin puts on the penguin-suit
| | | Re: a guide to basic rope work <Reply # 24 on 1/28/2010 7:02 AM >
| | | Here, I went and snagged a few of my pics to show off some of my niffty stuff =) http://www.uer.ca/...urrpage=1&pp#post0
Give a person a match and they'll be warm for a minute, but light them on fire and they'll be warm for the rest of their life. =) |
|
Intrinsic
Location: Collingwood Gender: Male
| | Re: a guide to basic rope work <Reply # 25 on 2/5/2010 4:12 PM >
| | | Whatever you do, make sure your rope is solid.
|
|
Ashes in the Snow
Location: Raleigh, NC Gender: Male
Ladder Addict
| | | Re: a guide to basic rope work <Reply # 26 on 2/6/2010 4:35 PM >
| | | ^^ Lol I love how the camera guy just zooms in as these guys slide to their death hahaha
http://www.flickr.com/kwikstix |
|
Therrin This member has been banned. See the banlist for more information.
Location: North of Chicago, IL Gender: Male
*Therrin puts on the penguin-suit
| | | Re: a guide to basic rope work <Reply # 27 on 2/12/2010 1:58 AM >
| | | Fail of epic proportions =O
Give a person a match and they'll be warm for a minute, but light them on fire and they'll be warm for the rest of their life. =) |
|
wopke
Gender: Male
| | Re: a guide to basic rope work <Reply # 28 on 2/13/2010 7:29 PM >
| | | nice thread!
I tried being reasonable, I didnt like it. - Clint Eastwood |
|
pkrearden
Location: Funkytown, TX Gender: Male
| | Re: a guide to basic rope work <Reply # 29 on 6/2/2010 12:21 AM >
| | | don't forget the alpine butterfly! damned handy lil knot.
"there is no devil, there's just god when he drinks." - Tom Waits |
|
SnuggleBear
Location: South Bay Area, CA [831] Gender: Male
| | | | | Re: a guide to basic rope work <Reply # 30 on 6/12/2010 5:59 AM >
| | | Also do some googling on using the prusik knot as an ascender if you're too cheap to buy an ascender, or might need to use it in an emergency.
^^Super proud of this symmetrical, redundant, no-slack, anchor onto some AC vents on a roof.
Deciding maybe it's not a good idea...
Don't ever use only one anchor to rappel off of. I have a special sticker to do so =P
My GF.
. : FMK : . 408/831 Let's meet up. |
|
brokkenladder
Location: Mount Vernon Gender: Male
| | Re: a guide to basic rope work <Reply # 31 on 6/14/2010 10:56 PM >
| | | Awesome topic. Lots of good points all around. One Question. Could you use Screw Down Link Rated for 2200LBS instead of a carabiner? I can get these at the local hardware store for about $2.50 a pop. Any disadvantages you could think of? I was thinking of maybe using these for the "permanant" links like anchor points and such. I will get some Carabiners for attatching to my harness and other "on hand" links. But I figured if its supposed to be locked and not need for quick dissasembly, why not? [last edit 6/14/2010 11:05 PM by brokkenladder - edited 1 times]
|
|
\/adder
Location: DunkarooLand Gender: Male
I'm the worst of the best but I'm in this race.
| | | Re: a guide to basic rope work <Reply # 32 on 6/15/2010 12:22 AM >
| | | Posted by brokkenladder Awesome topic. Lots of good points all around. One Question. Could you use Screw Down Link Rated for 2200LBS instead of a carabiner? I can get these at the local hardware store for about $2.50 a pop. Any disadvantages you could think of? I was thinking of maybe using these for the "permanant" links like anchor points and such. I will get some Carabiners for attatching to my harness and other "on hand" links. But I figured if its supposed to be locked and not need for quick dissasembly, why not?
|
Not as easy to place / remove (like you said) Anchors = potentially bad idea: even 9mm rope is rated for double the tensile strength of the 2200LBs link.
I use them in my SRT setup, haven't died yet.
Mallion links: Where the ascencion attaches to the sling and foot tape The foot tape came with a link. Where the croll attaches to the harness front tiein Carabiners: Where the torse harness attaches to the back tie in Where the sling attaches to the front harness harness The foot tape came with a link.
"No risk, no reward, no fun." "Go all the way or walk away" escensi omnis... |
|
SnuggleBear
Location: South Bay Area, CA [831] Gender: Male
| | | | | Re: a guide to basic rope work <Reply # 33 on 6/15/2010 8:03 PM >
| | | What's the nerf vortex for? Also I'd like to point out that this is what it means to have opposed carabiners: Always set up your system so you are never depending on just one piece of gear.
Also, does anyone have any experience with Grappling Hooks, or some other similar device? I know it sounds kind of silly, but I'd really like to start climbing buildings like that. Many buildings have only roof access, and rather than pick locks or break doors, I'd love to get in through the roof, as most times in abandonments people forget to lock that (who would be crazy enough to come through the roof?!?! Uhhh... us.) I saw some folding grappling hooks that come with rope and like shoe spikes for about 50$ on eBay, I'd be interesting in getting one just for the hell of it, seems like an interesting thing to have. (I'm a gear slut, I like collecting gear and tricking out "the bag" with cool stuff just as much as I actually like exploring) Anyways I'm sure the rope it comes with is crap, I'd never use it to climb, and I don't need the silly shoe spikes, just the hook and a couple of ascenders and we could pretty much get anywhere...
. : FMK : . 408/831 Let's meet up. |
|
\/adder
Location: DunkarooLand Gender: Male
I'm the worst of the best but I'm in this race.
| | | Re: a guide to basic rope work <Reply # 34 on 6/16/2010 2:12 AM >
| | | Posted by SnuggleBear What's the nerf vortex for? |
http://www.uer.ca/...rpage=9&pp#post170
Also, does anyone have any experience with Grappling Hooks, or some other similar device?
|
Good luck getting them down, if you can't up! Edit: Just read the linked thread for all infos [last edit 6/16/2010 2:14 AM by \/adder - edited 1 times]
"No risk, no reward, no fun." "Go all the way or walk away" escensi omnis... |
|
SnuggleBear
Location: South Bay Area, CA [831] Gender: Male
| | | | | Re: a guide to basic rope work <Reply # 35 on 6/17/2010 5:45 PM >
| | | OH MY GOD. I thought that's what that might have been for, but then I was like, no... no one would do that... That is so awesome. 10/10 good sir.
. : FMK : . 408/831 Let's meet up. |
|
vov35
Location: Maryland Gender: Male
| | Re: a guide to basic rope work <Reply # 36 on 6/30/2010 2:12 AM >
| | | I shat brix. Now I need to find some not over9000 dollar climbing gear...
"Only sheep need a shepherd." -- Voltaire |
|
SnuggleBear
Location: South Bay Area, CA [831] Gender: Male
| | | | | Re: a guide to basic rope work <Reply # 37 on 7/2/2010 2:33 AM >
| | | Posted by vov35 I shat brix. Now I need to find some not over9000 dollar climbing gear...
|
acmeclimbing.com Check out the package deals. Harness, shoes, descender/belay device, and chalk bag for like $120. Or the same package without shoes for $65. I bought two of those packages, one for my girl and one for me, and I'm happy with them.
. : FMK : . 408/831 Let's meet up. |
|
vov35
Location: Maryland Gender: Male
| | Re: a guide to basic rope work <Reply # 38 on 7/2/2010 6:47 PM >
| | | Posted by SnuggleBear
acmeclimbing.com Check out the package deals. Harness, shoes, descender/belay device, and chalk bag for like $120. Or the same package without shoes for $65. I bought two of those packages, one for my girl and one for me, and I'm happy with them.
|
Thanks, but that's still not quite enough. A group of people on highschooler's budgets need to get four sets of gear and two 50 meter dynamic ropes. fffffffffuuuuuuuu pricing. Thanks for the tip though.
Speaking of which, is climbing gear rated by breaking strength of WLL like most hardware store material? (because dirt cheap 500 pound hardware store carabiners = 9kn breaking strength...)
"Only sheep need a shepherd." -- Voltaire |
|
Man Underground
Location: Oz Gender: Male
freedom of choice ~ choose well
| | Re: a guide to basic rope work <Reply # 39 on 7/3/2010 4:27 AM >
| | | Posted by Intrinsic Whatever you do, make sure your rope is solid.
|
Damn, that was piss funny, cheers
I know not what I do, but when I do it |
|
|
|
All content and images copyright © 2002-2024 UER.CA and respective creators. Graphical Design by Crossfire.
To contact webmaster, or click to email with problems or other questions about this site:
UER CONTACT
View Terms of Service |
View Privacy Policy |
Server colocation provided by Beanfield
This page was generated for you in 156 milliseconds. Since June 23, 2002, a total of 741355222 pages have been generated.
|
|